Wilson Smart Technology Building 1900Mhz frequency amplifier. Wilson Electronics’ non down-converted bi-directional amplifiers are the most technologically advanced cellular amplifiers on the market today. Their most important feature is patented oscillation shutdown protection, which activates complete shutdown within just a few milliseconds to prevent harmful interference to cell sites. Wilson amplifiers also offer completely adjustable software-controlled automatic gain control, both on forward and reverse links, which allows the amplifiers to meet CDMA and GSM ACPR requirements.
The Wilson wireless building amplifier requires at least two antennas (not included). One antenna for outside and one for inside. The outside antenna must be at least 60 feet apart (50 feet if roof is constructed of metal or heavy concrete) away from the inside antenna. The distance must be actual distance between the inside and outside antennas not just cable length. Do not turn on your amplifier unless you have at least the above distances between the inside and outside antenna. These distances must be maintained or the signal will just oscillate between the two antennas and no improvement will be noticed. Also, not enough separation can damage the amplifier.
Wilson Electronics’ non down-converted bi-directional amplifiers are the most technologically advanced cellular amplifiers on the market today. Their most important feature is patented oscillation shutdown protection, which activates complete shutdown within just a few milliseconds to prevent harmful interference to cell sites. Wilson amplifiers also offer completely adjustable software-controlled automatic gain control, both on forward and reverse links, which allows the amplifiers to meet CDMA and GSM ACPR requirements. The amplifiers are invisible within CDMA and GSM systems. They also have the capability of following base station power requests which allows maintaining the full power dynamic range of the cell phone.
