The Wilson SignalBoost DB Pro DualBand 62db cellular repeater greatly improves signal strength for any cellular device inside a building on most networks. It does not require any physical connection to your phone allowing you to walk around freely during a call. It even allows multiple cell phones and/or Data Cards to be used simultaneously. Using the omni directional antenna included in this kit will capture the signal from multiple towers & service providers in the area. Separation requirement between the inside and outside antenna is 50 ft (inside panel antenna should be mounted so that it is pointed away from the outside antenna.)
The Wilson DB Pro In Building Cellular Amplifier Repeater is a small, bi-directional amp that deliver service levels consistent with what would be expected in areas of high cell network coverage. They amplify a weak or shadowed cellular signal and repeat it in an in-building application. When using a Wilson amplifier in conjunction with Wilson antennas, the outside antenna will collect the cell tower signal and send it through the cable to the amplifier. The signal is then amplified and broadcast from the inside antenna to the surrounding area.
Cell phones and cellular data cards in that area then communicate with the improved signal. When a cell phone or cellular device transmits, the signal is received by the inside antenna, amplified by the amplifier and broadcast back to the cell tower through the outside antenna.
Requires at least 50 feet of separation (25ft if using directional outside antenna) between Inside and Outside Antenna Requires fairly good signal outside (2-3 bars min.). The better the outside signal, the more cellular coverage inside the building. See below for estimating improved coverage area. All components are interconnected using standard TV cable (RG-6) which is easily available and often found pre-installed, simplifying cable runs.
