Wilson SignalBoost Cellular Signal Amplifier with 4 Wilson Antenna

Increase Your Cellular Signal 10 to 15 Times with Wilson Signal Booster The Wilson SIGNALBOOST Cellular/PCS signal amplifier improves wireless mobile signals on both Cellular (824-894 MHz excluding iDen frequencies) and PCS (1850-1990 MHz) bands. The Wilson SignalBoost works with Verizon, US Cellular, Cellular One, Alltel, Bell Canada, Telus, Cingular, Sprint, T-Mobile and all other Cellular and PCS carriers. (Note: This unit will not work with Nextel iDen Frequencies. See Nextel Mobile Wireless Amplifier) Comes with

• Wilson-+ SIGNALBOOST Cellular Signal Amplifier
• Cigarette Lighter DC Power Supply
• Wilson Ultra Slim antenna with Velcro-+ (Attaches to your phone or PC Card) apprx: 3 in. x 1.5 in.
• Wilson 4 Mini DualBand Antenna 301113
• User Guide

Optional AC wall outlet power supply available (not included).

No Device Specific External Antenna Adapter Required

A Wilson SignalBoost connects to your wireless phone or Data Card using the supplied Wilson Ultra-Slim Antenna (pictured). No other phone adapter is required. The connector is attached to your device using Velcro-+.

Improve Mobile Broadband Reception

Wireless 3G broadband service (EV-DO, EDGE/GPRS, HSDPA/ UMTS, etc.) from providers like AT&T Cingular, Sprint and Verizon is becoming more and more popular. Mobile broadband services like these that use the same frequencies as your cell phone can also benefit from the Wilson SignalBoost.

How the Wilson SignalBoost Universal Works

The Wilson SignalBoost has been carefully engineered to significantly improve the performance of your mobile phone or mobile broadband data card in both vehicle and home/office applications. Together with an antenna, the amplifier's state-of-the-art technology is designed to increase your signal up to 15 times, reduce disconnects and dropouts, and increase data communication rates needed for 3G technologies. The universal connector fits all cellular and PCS phones and data cards. The antenna will collect the cell tower signal and send it through the cable to the amplifier. The signal is then boosted and sent through the extension cable to the universal connector on your cell phone or data card, which then communicates with the improved signal. When the cell phone or data card transmits, the signal goes through the universal connector and the extension cable, is boosted by the cell phone amplifier and broadcast back to the cell tower through the antenna.

Universal SignalBoost Features

• Works on all generations of CDMA, TDMA and GSM
• Up to 3 watts maximum power
• Power control logic ensures maximum output power is within cellular standards
• FCC and IC type accepted
• US and foreign Patents Pending

SignalBoost Benefits

• Works with all Cellular/PCS cell phones and laptop data cards (except iDEN, Nextel)
• Connects to ALL phones and data cards with a Universal Connector using a removable adhesive backed Velcro-+ patch
• No plug-in adapter needed
• Up to 10 times more power than your cell phone or laptop data card
• Significantly improves voice and data signal quality
• Increases data communication rates needed for 3G technologies
• Receives and transmits better than your cell phone
• Extends cell phone battery life
• Works great in mobile, in-building, and marine applications
• Easy to install and use, and it's inexpensive

Wilson SignalBoost Specifications

• Part Number: AM811210
• Frequency: 824-894 MHz / 1850-1990 MHz
• Gain: cell site controlled
• Max Output Power: 3 watts (cell site controlled)
• Max RF: +35 dBm / +33 dBm Noise Figure
• 3.5 dB nominal Flatness
• ± 2 dB / ± 2 dB
• Isolation: < 50 dB uplink/downlink
• Power Requirements: 12 V DC, 2 A
• Connectors: FME-Male 50 ohms
• Dimensions: 5 x 3.5 x 1.2 (inches) 12.7 x 8.9 x 3 (cm)
• Weight: 1.03 lbs / 0.468 kg